GerTechTeile® ist die leistungsfähigste DPF- und Katalysator-Reinigungs- und Pflege-Lösung.
Warum sollten Sie GerTechTeile® DPF verwenden?
- Bis zu 100% Filterreinigungskraft
- Schnelle Ergebnisse: 30-60 min
- Ohne Demontage
- Keine negativen Einflüsse auf die Partikelfilterkeramik und -beschichtung
- Längere Motorlebensdauer
- Höhere Leistung und Drehmoment
- Sauberere Umwelt
- Verbesserter Kraftstoffverbrauch
- Speziell für Pkw, Kleintransporter und Lkw entwickelt
- Lang anhaltende Ergebnisse
- Bei regelmässiger Anwendung (alle 50.000 km) wird die Lebensdauer Ihres DPFs verlängert und teure Reparaturen werden vermieden!
GerTechTeile DPF & Catalytic Converter Cleaning Solution
Please contact us for a price quote at: contact@gertechteile.de
1. Although GerTechTeile DPF cleaning solution has no permanent effects on the skin, it is mandatory to always wear a mask, goggles and gloves.
2. Locate the oxygen sensor (lambda sensor) on your engine. DO NOT USE THE CLEANING SOLUTION UNLESS YOU ARE 100% CONFIDENT THAT YOU HAVE IDENTIFIED THE SENSOR CORRECTLY!!!
3. Start the engine and let it reach 90 degrees Celsius. Switch off the engine.
4. Read the backpressure value using an OBD tester OR measure it using a pressure gauge placed in the oxygen sensor port after removing it.
5. Pour a bottle of GerTechTeile DPF solution into the metal system and attach it to the air pressure OR install the special conical cap and hose on the bottle.
6. Connect the hose to the oxygen sensor port (after removing it previously). Start the engine.
7. Inject the entire bottle into the exhaust system through the oxygen sensor port while the engine is running at idle.
8. Replace the oxygen sensor and let the car idle for 5 minutes.
9. After 5 minutes at idle, press the accelerator pedal to 1500-2000 RPM and hold it down for 10 minutes. Turn the engine off.
10. Read the backpressure value on the OBD tester OR using the gauge inserted in place of the oxygen sensor (after removing it). If you see 50-60 mBars at 2500 RPM, your filter is clean. If you have not reached the desired value, you can repeat the process.(There are cases where the DPF is melted, so GerTechTeile DPF cannot help).
To get a valid result, all sensors (differential pressure sensor, temperature sensor, lambda sensor) should function correctly